Ningún producto
Estos precios se entienden IVA incluído
PT-DS12KU
Nuevo producto
Disponible el:
Precios Especiales para Proyectos de Volumen, Favor de Verificar Precios y Existencias previo a su compra * Precios con IVA y Garantía en Mexico Directo con Fabricantes.
Proyector PANASONIC
PT-DS12KU
DLP12000
Lumenes
WUXGA 3D HDMI DVI-D D-SUB
RJ-45
Este producto se maneja sobre pedido
y es necesario verificar existencias con el fabricante.
Power supply
120 V, 220-240 V AC, 50/60 Hz
Power consumption
120 V AC
980 W (1,010 VA)
(0.2 W with standby mode set to eco.*1
6 W with standby mode set to normal.
Both with fan stopped.)
220-240 V AC
950 W (980 VA)
(0.3 W with standby mode set to eco.*1
9 W with standby mode set to normal.
Both with fan stopped.)
Dissipation BTU
120 V: 3,345 BTU/hour
(without light output: 3,181 BTU/hour).
220–240 V: 3,242 BTU/hour
(without light output: 3,079 BTU/hour)
DLP™ chip
Panel size
24.1 mm (0.95 in)
diagonal (4:3 aspect ratio)
Display method
DLP™ chip x 3, DLP™ projection system
Pixels
1,470,000 (1,400 x 1,050) x 3,
total of 4,410,000 pixels
Lens
Optional powered zoom/focus and fixed-focus lenses
Lamp
380 W UHM lamps (HIGH mode) x 2
Screen size (diagonal)
1.78 –25.4 m (70–1,000 in),
1.78 –15.24 m (70–600 in)
with the ET-D75LE8, 4:3 aspect ratio
Brightness*2
12,000 lm*3 (dual-lamp)
Center-to-corner uniformity*2
90 %
Contrast*2
10,000:1 (full on/off, with DYNAMIC IRIS set to "3")
Resolution
1,400 x 1,050 pixels
(Input signals that exceed this resolution will
be converted to 1,400 x 1,050 pixels.)
Scanning frequency
SDI
Dual-link
HD-SDI
SMPTE ST 372 compliant,
[RGB 4:4:4 12-bit /10-bit] 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p,
[X´Y´Z´ 4:4:4 12-bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF
3G-SDI
SMPTE ST 424 compliant,
[RGB 4:4:4 12-bit /10-bit] 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
HD-SDI
SMPTE ST 292 compliant,
[YCBCR 4:2:2 10-bit] 720/50p, 720/60p,
1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SD-SDI
SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
HDMI/DVI-D
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)–WUXGA*4 (1,920 x 1,200),
compatible with non-interlaced
signals only, dot clock: 25–162 MHz
RGB
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 20–162 MHz
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)]
fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)]
fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/Y/C
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*5
Vertical
±50 % (±40 % with the ET-D75LE6)
from center of screen (powered)
Horizontal
±30 % (±20 % with the ET-D75LE6)
from center of screen (powered)
Keystone correction range
Vertical: ±40°*6, horizontal: ±15°
Keystone correction range with
optional Upgrade Kit ET-UK20 Vertical ±40° and horizontal ±40° with the ET-D75LE1/LE2/LE10/LE20,
vertical ±45° and horizontal ±40° with the ET-D75LE3/LE4/LE30/LE40,
vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50,
vertical ±28° and horizontal ±15° with the ET-D75LE6
Installation
Ceiling/floor, front /rear, portrait*7
Terminals
SDI 1 IN
BNC x 1 (3G/HD/SD-SDI)
SDI 2 IN
BNC x 1 (HD/SD-SDI)
3D SYNC IN/OUT
BNC x 1 (3D timing signal)
3D SYNC OUT
BNC x 1 (3D timing signal)
DVI-D IN
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible
with HDCP, compatible with single link only)
HDMI IN
HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB 1 IN
BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
RGB 2 IN
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN
BNC x 1 (composite video)
SERIAL IN
D-sub 9-pin (female) x 1 for external
control (RS-232C compliant)
SERIAL OUT
D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN
M3 x 1 for wired remote control
REMOTE 1 OUT
M3 x 1 for link control (for wired remote control)
REMOTE 2 IN
D-sub 9-pin (female) x 1 for external control (parallel)
LAN
RJ-45 x 1 (for network connection,
10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials
Molded plastic
Dimensions (W x H x D)
530 x 200*8 x 548.5 mm
(20-7/8 x 7-7/8*8 x 21-19/32 in) (optional lens not included)
Weight*9
Approximately 24 kg (52.9 lbs) (optional lens not included)
Operation noise*2
45 dB (dual lamp operation with lamp HIGH mode),
43 dB (dual lamp operation with lamp MIDDLE mode),
37 dB (dual lamp operation with lamp ECO mode)
Operating environment
Operating temperature: 0–45°C (32–113°F)*10,
operating humidity: 10–80 % (no condensation)
Applicable software
Logo Transfer Software, Multi Projector
Monitoring & Control Software,
Geometry Manager Pro (included in the ET-UK20)
Supplied accessories
Power cord with secure lock, wireless/wired
remote control unit, batteries (R6/AA type x 2)
PRECIO IVA INCLUIDO Y GARANTÍA EN MÉXICO
Las imágenes solo se muestran de forma ilustrativa.