Handheld Computer INTERMEC CK3N20M00E100 Wireless

USD

Este producto se maneja sobre pedido

 

y es necesario verificar existencias con el fabricante

Precio en USD Dólares

 

We Didn’t Compromise; Neither Should You
Balancing cost control with customer
satisfaction requires true supply chain
agility. Delivering on that vision requires
your staff to be equally agile, with the
ability to react to every situation quickly,
confidently and accurately.
However, finding the optimal rugged mobile
business solution to achieve supply chain
agility can often present another balancing
act: satisfying the needs and preferences
of operations management, users and
IT, without trade-offs and sacrifices.
Intermec is the first to offer a nocompromise solution with the CK71 ultrarugged mobile computer. In addition to
being 31% smaller and lighter than other
form factors in its ultra-rugged class, the
CK71 is optimized for your warehouse and
distribution environments with premium,
industrial grade materials for the perfect
balance of ruggedness and duty cycle
along with next generation features that
focus on enabling flexibility and agility,
even in the most extreme conditions.
To create the smoothest possible integration
into your workflows, we surrounded it
with a complete set of software, tools,
services and training modules, delivered
by us and from our global network of
best-in-class reseller and ISV partners.
Every 70 Series mobile computer comes
pre-loaded with Intermec’s ScanNGo client
to provide a premium device provisioning
experience to simplify and expedite
device staging operations. The standalone
ScanNGo client enables CK71 users to
provision, configure and automatically
download application software in a
matter of seconds rather than minutes by
simply reading pre-configured barcodes.
Every Second Counts
When workload demands shift
unexpectedly, the CK71 gives you the
flexibility to re-deploy staff without
consideration to the tools needed to get
the job done. As a result, workers can
quickly and confidently transition to
tasks that require near or far scanning,
speech, voice, and image capture, without
wasting time finding and re-orienting
themselves on unfamiliar devices.
With the industry’s first dual-band
802.11n WLAN radio, the CK71 delivers
rock solid performance and consistently
fast response times, even in areas
where you might experience low signal
levels or intermittent connections with
traditional 802.11a/b/g products.
And by combining the latest generation of
superscalar multi-processor architecture that
delivers up to three times the performance
The Intermec CK71 is the no compromise,
next generation ultra-rugged
mobile computer that achieves true
functional agility with the perfect
balance of ruggedness, duty cycle and
ergonomics for the most demanding
distribution environments.
• 31% smaller and lighter than leading
devices in the ultra rugged class
• Industry’s fastest and farthest imaging
engines delivering superior motion
tolerance and barcode read range
• Exceptional peripheral support
and quick change snap-on
accessories provide versatility for
every distribution environment
• On-board diagnostics and
INcontrol Managed Services
provide device health visibility
• Advanced power and battery
management technologies
extend device run time and reduce
expense of replacement batteries
• Dual band 802.11n radio for
pervasive wireless coverage
Product profileat half the power consumption of legacy
processors along with state-of-the-art
battery health diagnostics, the CK71
can be relied upon to deliver the power
and performance you require as well
as reduce the expenses associated
with replacement batteries.
The CK71 leverages Intermec’s industryleading near/far area imager, capable of
scanning from 15.2 cm up to 15.2 m (6 in
up to 50 ft) allowing you the flexibility
to read both 1D and 2D barcodes without
the need for specialized scanners. For
highly dynamic environments, the CK71
also offers Intermec’s latest achievement:
the industry’s fastest imaging engine,
capable of scanning barcodes moving
at up to 12.7 m (500 in) per second,
enabling the CK71 to provide remarkable
tolerance to hand or barcode movement.
An Ounce of Prevention
The pace and competitiveness of
business today depends on your ability
to identify and prevent problems before
they impact your productivity, and
ultimately your customers’ satisfaction.
The unique device health reporting
capability of the CK71 provides insight
never before available to allow workers
and IT administrators to monitor and
prevent issues before they impact
operations. Key sub-systems including
battery life, scanning, and communications
can be monitored by either the mobile
worker via an on-board dashboard
or remotely through the Intermec
SmartSystems™ console resulting in
optimization and better utilization
of your mobile computing assets.
For customers who want a trusted
partner to take over the day-to-day task
of managing and troubleshooting their
mobile devices and WLAN infrastructure,
Intermec’s INcontrol managed services
portfolio offers flexible, integrated mobile
device and wireless network management
service options via a hosted web based
tool set. Through INcontrol, technical
experts from Intermec or one of its
qualified PartnerNet members, assumes
these tasks allowing customers to achieve
a lower total cost of ownership (TCO).
Based on a Shared Platform
The CK71 is just one model out of four
ergonomic designs that are available in
the 70 Series family. Each model includes
choices of radios, keypads, imagers,
software and services providing you the
option of tailoring a specific solution to
meet the various application areas within
your environment and the preferences
and needs of your employees.
With a single platform approach, the 70
Series family is unique in its ability to
reduce infrastructure complexity and
cost. The single computer architecture,
software build, set of peripherals and
charging system that is shared between
the 70 Series products brings simplicity to
the frequent tasks of software updates,
training new employees, managing
spares pools and charging devices.
Break the Cycle of Infrastructure Replacement
All of the 70 Series products are supported
by a new docking system designed to
maximize the return on your investment in
charging and communications infrastructure
and greatly reduce the space you must
devote to it. Called FlexDock, the system
uses a common 2- or 4-position base,
combined with cups for mobile computers
and battery packs in any combination,
to adapt the base your specific needs.
In addition to wall mounting, FlexDock
offers expanded mounting options to
facilitate the use of standard IT equipment
racks for better backroom space utilization
and smaller footprint requirements.
When it’s time to migrate or upgrade
equipment, cost and complexity are
reduced because existing cups can
be easily replaced with new cups
corresponding to the next generation
solution, allowing the original bases and
supporting components to be reused.
Confidence to Meet Your Goals
When the reliability, efficiency and accuracy
of your operations are the foundation to your
competitive advantage, there is no room
for compromise. The Intermec CK71, and
the 70 Series family of mobile computers,
provides unparalleled performance in
extreme operating conditions enabling you
to run your operations with confidence.

Physical Characteristics
Dimensions with battery:
L x W x D: 23.7 x 8.0 x 5.0 cm (9.33 x 3.16 x 1.98 in)
Weight: 584 g (19.75 oz) with battery
Environmental
Operating Temperature: -20° C to +60° C (-4° F to +140° F)
Storage Temperature: -30° C to +70° C (-22° F to +158° F)
Charging Temperature: +5° C to +35° C (41° F to 95° F)
Relative Humidity: Non-condensing, 95%
Rain & Dust Resistance: IP67
Drop Specification: 1.8m (6 ft) to concrete, across
operating temperature range, per MIL-STD 810G
2000 – 1 meter tumbles
Electrostatic Discharge: +/- 15 kV air discharge;
+/- 8 kV direct discharge
Power
Battery Pack: 3.7 V, 5200 mAh; Li-Ion, removable,
rechargeable
Operating System
Microsoft Windows Embedded Handheld built on
Windows 6.5.3 technology
Getting started information:
www.windowsmobile.com/getstarted
Multi-Processor Architecture
Texas Instruments OMAP 3530, 600 MHz, multi-core
processor with superscalar architecture
Memory and Storage
Memory: 512 MB RAM (approximately 384 MB available)
ROM: 1 GB Flash (Approximately 800 MB available)
Customer-accessible micro-SD slot for removable
memory cards up to 32 GB
Display
• 8.9 cm (3.5 in) Transmissive VGA
• 480 x 640 pixels
• 65,536 (16 bit RGB) Colors
• High-Durability Touch Screen
• LED Backlight
• Ambient Light Sensor
Standard Communications
USB – Full Speed 2.0 OTG©
, USB – Full Speed 2.0 Client©
Software
Device Management: Intermec SmartSystems™
support includes ScanNGo provisioning for use alone or
with device management software from Intermec ISVs
Device Health Monitoring: Remote access requires
SmartSystem Management option

Application Development: Intermec Developer Library
www.intermec.com/dev
Apps & Components
VERDEX (Imaging based data extraction and
verification), Mobile Document Imaging (eMDI),
Intermec Client Pack (Terminal Emulator/Browser)
Data Management
Skynax® Mobile Communications
Integrated Radios
Wireless LAN: IEEE®802.11 a/b/g/n Dual Band WLAN
Security: WiFi Certified for WPA and WPA2
Authentication: 802.1x
Cisco Compatibility: CCXv4
Encryption: WEP (64 or 128 bit), AES, TKIP
Wireless PAN: Integrated Bluetooth® Class II,
Version 2.1+EDR
Operating channels: 0 to 78 (2402-2480 MHz)
Data Rates: 1, 2, 3 Mbps
Antenna: Internal
Sensor Technology
Accelerometer: Embedded accelerometer enables
automatic or application-specific features such as
screen rotation or system suspend
Digital Compass: Integrated, independent digital
compass provides directional information
Audio Support
Supports VoIP / Speech recognition / Push to talk
applications; front and rear speakers; rear speaker
>80 dB at 40 cm (15.7 in); Front receiver and front
panel microphone for handset audio communication
and audio recording; Wireless Bluetooth headset
support; Wired headset support via snap on adapter
Integrated Scanner Options
EV12 linear Imager with laser-like aimer; Capable of
scanning 1D barcodes at standard range
EA30 high performance motion-tolerant 2D Imager;
white LED illumination; red laser aimer optimized for
all lighting conditions; Capable of scanning all common
1D and 2D barcodes; 1D as small as 5 mil; PDF as small
as 6.6 mil; Data Matrix as small as 7.5 mil; and standard
UPC codes from distances up to 33 cm (13 in)
EX25 near/far 2D Imager; Capable of scanning 1D and
2D barcodes from 15.2 cm to 15.2 m (6 in to 50 ft)
Integrated Camera Option
5 Megapixel auto focus color camera with LED flash

Keypad Options
Both keypad options feature hard keycaps with
laser-etched legends
Numeric with function keys
Alphanumeric
Intermec Global Services Support:
www.intermec.com --> Support --> Knowledge Central
Telephone support available in the USA & Canada
(+1-800-755-5505). Outside of this area, contact your
local representative.
Maintain software and device configuration with
INcontrol Managed Services. Current listing of all
Intermec service products can be found at:
www.intermec.com/services
Accessories
FlexDock modular docking system, vehicle dock and
holder, snap on adaptors, removable scan handle, and
magnetic stripe reader
Regulatory Approvals and Compliance
1001CP01
Safety: cULus Listed, DEMKO, BSMI (pending)
EMC: Class B – FCC/ICES/EN, GOST-R
Radio: FCC w/HAC, Industry Canada, , A-tick
(AU), C-tick (NZ), NCC (pending), OFTA (pending), IDA
(pending), ICASA (pending), POSTEL (pending), NTC
(pending), ETA (pending), SIRIM (pending), ANATEL
(pending), 61 countries in total
Environmental: EU Directives-WEEE; RoHS; Batteries
& Accumulators; Packaging & Waste Packaging

 

 

 

Intermec